Can You Glue Down Laminate Flooring

One of the most common questions when it comes to laminate flooring is whether or not it can be glued down. The answer is yes, laminate flooring can be glued down, but there are certain factors to consider before doing so.

In this article, we will discuss the pros and cons of gluing down laminate flooring, as well as the tools and materials needed to complete the job. Whether you’re a DIY enthusiast or a professional installer, this guide will provide you with the information you need to successfully glue down your laminate flooring.

How to glue down laminate floor

To glue down laminate flooring, you will need the following tools and materials:

  • Laminate flooring
  • Underlayment
  • Moisture barrier (if needed)
  • Construction adhesive
  • Notched trowel
  • Measuring tape
  • Saw (table saw or circular saw)
  • Jigsaw (if necessary)
  • Safety goggles
  • Gloves
  • Knee pads (optional)
  1. Start by preparing the subfloor. Make sure it is clean, level, and free of any debris. If the subfloor is concrete, it should be tested for moisture and sealed if necessary, read this guide on how to put laminate flooring over concrete.
  2. If your laminate flooring requires an underlayment, lay it down according to the manufacturer’s instructions.
  3. If a moisture barrier is needed, roll it out and overlap the seams by at least 6 inches.
  4. Measure the room and cut the laminate flooring to fit, leaving a small expansion gap around the perimeter of the room.
  5. Apply construction adhesive to the subfloor using a notched trowel. Spread the adhesive evenly, making sure to cover the entire area.
  6. Carefully lay the laminate flooring in place, making sure to align the edges and joints. Press the flooring firmly into the adhesive.
  7. Use a tapping block and a hammer to secure the flooring in place.
  8. Repeat the process for the remaining sections of flooring.
  9. Allow the adhesive to dry according to the manufacturer’s instructions before walking on the flooring.

It’s important to follow the manufacturer’s instructions for the specific laminate flooring you are using, as the instructions may vary based on the type of laminate flooring and adhesive you are using. It is also important to wear safety goggles and gloves and to take appropriate safety precautions when working with power tools and construction adhesive.

Pros of gluing down laminate flooring

  1. Increased stability: Glueing down the laminate flooring will keep it in place and prevent it from shifting or moving. This is especially beneficial in high-traffic areas or in homes with pets or children.
  2. Better sound insulation: Laminate flooring glued down will provide better sound insulation compared to a floating floor, this is because the adhesive that is used to glue down the laminate flooring will help to absorb sound vibrations.
  3. Reduced gap: Glueing down the laminate flooring will eliminate the gap between the laminate and the subfloor, creating a seamless look.
  4. Easy to maintain: Since the laminate flooring is glued down, it will not shift or move, making it easy to maintain and clean.

Cons of gluing down laminate flooring

  1. Permanent installation: Once the laminate flooring is glued down, it is difficult to remove it without causing damage to the subfloor.
  2. Difficult to repair: If a laminate board becomes damaged, it will be difficult to remove and replace without damaging the surrounding boards.
  3. Requires more skill: Glueing down laminate flooring requires more skill and precision than a floating floor installation. It is not a good idea for a DIY if you don’t have the proper skills and tools.
  4. Extra cost: Glueing down laminate flooring can be more expensive than a floating floor installation, because it requires additional materials such as adhesive and a notched trowel.

In conclusion, gluing down laminate flooring has its advantages and disadvantages, so it’s important to weigh the pros and cons before deciding on the best method for your specific project.